When you need to refurbish furniture, crown molding, trim, cabinets, or restroom vanities, Cabinet Coat is an excellent option. This application features outstanding adhesion and is suitable for painting hard surfaces. It can be used without a paint primer, even on varnish and polyurethane materials. Cabinet Coat exhibits a highly-durable semi-gloss which offers optimum flow and leveling.



Preparation for Surfaces

Surface areas need adequate preparation for the finest results. Be sure that the surfaces you are painting are free from dust, wax, grease, oil, mildew, or any contaminants and that they are clean and dry. Use soapy, warm water to clean away any dirt or chalk with some mild cleansing. A commercial wax stripper may be necessary if you are eliminating surface wax. Go with a grease or oil emulsifier to manage slick applications.

Preparing the section is time-consuming; however, it will substantially improve your end result. Clean previously painted surfaces by extracting all chipping, cracking and peeling loose paint. Sand your working surface with help from hand-scraping tools, sanders, electric grinders and wire brushes to lift off debris. Any metal pieces need to be free from chips, mill scale and corrosion deposits. Any kind of broken surfaces which are delaminated require repairs and sometimes replacement.

Next, carefully sand the rough paint edges next to the surface area. Any lustrous surfaces need to be sanded lightly to dull and scratch up the present sheen to produce a more adhesive surface area for paint. Vacuum after sanding to remove all dust and debris ahead of painting.

Application Tips For Success

Use a paintbrush or a roller to apply Cabinet Coat. You can utilize the HVLP method and spray this product but ensure it has been stirred thoroughly first. Attempt to maintain a wet paint edge when you are brushing and rolling while you cover portions that have been coated previously. Cabinet Coat dries swiftly. Be wary of brush or roller marks appearing on an overworked product. Cabinet Coat is best applied when the ambient and surface temperature are higher than fifty degrees Fahrenheit and less than 90 degrees Fahrenheit. Do not paint if there is any potential for moisture amassing on the wet paint.



Clean Up Practices

Cleanup when your painting venture is complete by counting on soapy, warm water. Immediately after thoroughly washing your hands, immerse your equipment, paint rollers and brushes. Adhere to correct safety standards for discarding the rinse water. A local recycling location normally takes empty and dried up containers. Be diligent to find out what your neighborhood disposal conditions are with your sanitation department. Consult your local environmental agency to discover which disposal choices will be suitable.

Health, Safety and Environmental Information

It is essential to have adequate air flow when using this product. Never breathe in any sanding dust or spray mist. Ensure there is a clean air entry for drying and safe application. Don’t permit any of the products have exposure to the eyes or skin. An approved NIOSH respirator is required for applying, clean up and sanding solutions to protect you from dust and spray mist. Ensure proper respirator use by following instructions from the manufacturer. Wash your hands before and after use and make sure the container is always closed when you are finished the application.



Know the FIRST AID Requirements Before Using

Wash your eyes for at least fifteen minutes if any exposure occurs. Water and soap can help you clean up if any skin contact happens. Don’t wait to seek medical treatment if required. Get out into the fresh air immediately if there is any difficulty breathing. Seek medical assistance if breathing trouble continues.